MODELS VSS, VSSAP, & VSESA SINGLE SOLENOID
SINGLE SOLENOID
(GENERAL PURPOSE)
|  A maintained electrical contact is required to shift the valve. Breaking the electrical contact will return the valve to its original position. |
| A momentary (NOT continuous) electrical contact is required to shift the valve. It will remain in that position until a separate momentary pilot pressure is applied to the spool cap opposite the solenoid, returning the valve to its original position. Pilot pressure must be at least 25% of the operating pressure. |
|
A momentary (NOT continuous) electrical contact is required to shift the valve. A separate Bleeder Valve, such as the Allenair BV100 or BV-1/8, must be installed in the line to the spool cap opposite the solenoid. Depressing this Bleeder Valve momentarily will return the valve to its original position. | ||
 NOTES:
|
OPTIONS (SOLENOID VALVES)
|
SPECIFY HTP FOR HIGH TEMPERATURE SEALS These seals are a fluorocarbon compound (viton) and have an operating temperature range of +10 degrees F to +350 degrees F. They will function at temperatures up to +400 degrees F with reduced life. SPECIFY IL FOR INDICATOR LIGHT (AAS OPERATOR ONLY) SPECIFY OR FOR MANUAL OVER-RIDE LEVER SPECIFY PE FOR PIPED EXHAUST ADAPTERS |
SOLENOID OPERATORS
| AAC CONDUIT HOUSING | UL & CSA Listed. |
| AAD DIN-type HOUSING | A male connector configuration of DIN 43650/ISO 4400. Click Here for female connectors. |
| AAG GROMMET HOUSING | UL & CSA Listed. |
| AAS SPLICE BOX HOUSING | STANDARD, UL & CSA Listed. |
| AAX EXPLOSION PROOF | UL Listed covering Class I Groups C & D (NEMA 7) and Class II Groups E, F & G (NEMA 9). |
| AAY SPADE TERMINALS | UL & CSA Listed. |
| JIC NEMA 4/IP-56 | Water Tight per NEMA 4/IP-56 |
| AAN6 NEMA 6 | Water Tight per NEMA 6 |
