Menu
MODELS VER SINGLE SOLENOID & SDS DOUBLE SOLENOID
SINGLE SOLENOID
MODEL VER AUTOMATIC RETURN
Models incorporate a 4-way Single Solenoid Double Bleed Pilot Valve. A momentary (NOT continuous) electrical contact is required to move the rod its full stroke. Upon reaching its FULL stroke, the rod will automatically return to its original position.
Models can be supplied with the rod normally retracted (electrical contact will extend rod) or normally extended (electrical contact will retract rod).
The standard solenoid operator is the AAS splice box housing.
Due to internal construction and application requirements, there can be a loss of approximately 1/8” to 1/4” of stroke.
Bore Sizes Available:
1-1/2”, 2”, 2-1/2”, 3”, 4” & *5”.
Voltages: 12, 24, 120 & 240/60
and 6, 12 & 24VDC are standard.
* 5” BORE AVAILABLE-Consult Factory for Details.

ROD NORMALLY EXTENDED MODEL VERE Energize solenoid to retract rod and extend automatically.
DOUBLE SOLENOID
MODEL SDS
Models incorporate a 4-way Double Solenoid Pressure Pilot Valve. A momentary or maintained electrical contact applied to one solenoid will move the rod its full stroke. The rod will remain there under pressure until the other solenoid is energized, which will cause the rod to return to its original position. If a maintained contact is employed, the first solenoid must be de-energized before the other is energized. The standard solenoid operator is the AAS splice box housing.
Bore Sizes Available:
1-1/8”, 1-1/2”, 2”, 2-1/2”, 3”, 4” & *5”.
Voltages: 12, 24, 120 & 240/60 AC
and 6, 12 & 24VDC are standard.
* 5” BORE AVAILABLE-Consult Factory for Details.