MODELS SVS, SVEVA – SINGLE SOLENOID
These models incorporate a 4-way Single Solenoid Pilot Valve, air return. A maintained electrical contact is required to move the rods its full stroke. Breaking the electrical contact returns the rod to its original position.
Models can be supplied with the rod normally retracted (electrical contact will extend rod) or normally extended (electrical contact will retract rod).
The standard solenoid operator, is the AAS Splice box housing.
Bore Sizes Available:
1-1/8”, 1-1/2”, 2”, 2-1/2”, 3”, 4” & *5.
Voltages: 12, 24, 120 & 240/60 AC
and 6, 12 & 24VDC are standard.
* 5” BORE AVAILABLE-Consult Factory for Details.
Energize solenoid to extend rod, de-energize solenoid to retract rod.
Energize solenoid to retract rod, de-energize solenoid to extend rod.
These models incorporate a 4-way Single Solenoid Double Bleed Pilot Valve. A momentary (NOT continuous) electrical contact is required to move the rod its full stroke. A Bleeder Valve, such as the Allenair BV100 or BV-1/8 (to be ordered separately), must be connected to the spool cap opposite the solenoid. Depressing this Bleeder Valve momentarily will return the rod to its original position.
Models can be supplied with the rod normally retracted (electrical contact will extend rod) or normally extended (electrical contact will retract rod). The standard solenoid operator, as shown is the AAS splice box housing.
Bore Sizes Available:
1-1/8”, 1-1/2”, 2”, 2-1/2”, 3”, 4” & *5”.
Voltages: 12, 24, 120 & 240/60 AC
and 6, 12 & 24VDC are standard.
* 5” BORE AVAILABLE-Consult Factory for Details.
FOR DIMENSIONS Click Here
AND FOR MOUNTS CLICK HERE
AVAILABLE IN TYPES “AV”, “CV”, “EV” & “EVT”
OPTIONAL BLEEDER VALVE RETRACTS RODROD NORMALLY EXTENDED MODEL SVEVAE Energize solenoid to retract rod, manual bleed signal to extend rod.
OPTIONAL BLEEDER VALVE EXTENDS ROD
