You are now viewing:

TYPES AVSM – 1/2”, 3/4”, & 1-1/8” BORE SIZES


Stainless Steel Tube Completely Repairable Unit

DESIGN FEATURES & MATERIALS

Most common AC & DC Voltages are available. 12, 24,120 & 240/60 and 6, 12 & 24VDC are standard.

Maximum operating pressure – 150 P.S.I.

A continuous electrical contact is required to fully extend the rod, which will remain extended until the electrical contact is broken, at which time the spring will return the rod to its fully retracted position. This action can be reversed by using the optional PE adapter as the air inlet.

TYPE AVSM – 1/2”

Standard stroke lengths in 1/2” increments to 4”.

Spring Force:
20 oz. retracted.
40 oz. extended.

TYPE AVSM – 3/4”

Standard stroke lengths in 1” increments to 4”.

Spring Force:
2 Ibs. retracted.
7 Ibs. extended.

TYPES AVSM- 1-1/8”
            AVSMS- 1-1/8”

Standard stroke lengths in 1” increments to 4”.

Spring Force:

AVSM AVSMS
3 6–1/2 lbs. retracted
6 13 lbs. extended
OPTIONS

SPECIFY HTP FOR HIGH TEMPERATURE CYLINDER SEALS

These seals are a fluorocarbon compound (viton) and have an operating temperature range of 10° F to 350° F. They will function at temperatures up to 400° F with reduced life.

SPECIFY OR FOR MANUAL OVER-RIDE LEVER

Non-locking manual over-ride lever is available. It is particularly useful for set-up or when an electrical failure occurs.

SPECIFY IL AFTER VOLTAGE FOR INDICATOR LIGHT
Light indicates when solenoid is energized.

ACCESSORIES

SPECIFY AE FOR ADJUSTABLE EXHAUST

The exhaust screw threads into the solenoid plunger housing, enabling speed adjustment of retracting stroke. (Cannot be used with piped exhaust or silencer.)

SPECIFY PE FOR PIPED EXHAUST

Adapters are available which screw into the solenoid plunger housing, enabling the exhaust to be piped from the unit. (Cannot be used with adjustable exhaust or silencer.)

SPECIFY EA-27 FOR SINTERED SILENCER

Silencers are available which screw into the solenoid plunger housing reducing exhaust noise to an acceptable level. (Cannot be used with adjustable exhaust or piped exhaust.)

ORDER MOUNTS SEPARATELY- SHOWN BELOW

DIMENSIONS

MOUNTING BRACKETS

NOTES: FRONT NOSE MOUNTING
NUT IS PROVIDED WITH EACH
CYLINDER.
NOTE: * Foot Mounts will be sold only in pairs, (Front & Rear). Rear Foot Mount slips over tube, “C” Dia.

Click Here To View/Download PDF For Valve-in-Heads

Pneumatic Cylinders, Digital feedback air Cylinders, Air Cylinders, Small Bore Cylinders, Valve In Heads Cylinders, Cyl Check Cylinders, Air Clamp Cylinders, Small Bore SS Cylinders, Position Feedback Cylinders, Valves, 4 Way ¼, 3/8, & ½ NPT Valves, 2 Way, 3 Way Solenoid 1/8 & ¼ NPT Valves, 4 Way Direct Acting 1/8 NPT Valves, Time A Valve, Air Switch Valve, 1/8 NPT Poppet Valve