You are now viewing:

TYPES SSTET TANDEM SINGLE ENDED AND DOUBLE ENDED


TANDEM:

TYPE: ET SINGLE ENDED
TYPE: ETD DOUBLE ENDED
The basic construction of these Cylinders is identical to Type “E” and feature two Cylinders in tandem having two pistons mounted on one common rod. Pneumatic operation with hydraulic control can be obtained by operating the rear Cylinder pneumatically and filling the front Cylinder with oil and piping its ports in series using a flow control valve. The output force of a single Cylinder can be almost doubled using a Tandem Cylinder and piping both rear ports together and both front ports together, which will apply the working pressure to both Cylinders at the same time. This is particularly useful when space limitations preclude the use of large bore Cylinders, and the force required is greater than that supplied by smaller bore units.
Bore Sizes Available: 1-1/2” & 2”
Maximum Stroke Available:
Type “SSET”     : 12”.
Type “SSETD”  : 12”.

TYPE SSTET TANDEM

Add TB to the SUFFIX for thread on both ends. See BB♦ dimension.

FOR ALL DIMENSIONS NOT LISTED, SEE TABULATIONS BY CLICKING HERE.

TYPE SSTETD TANDEM DOUBLE ENDED

FOR ALL DIMENSIONS NOT LISTED, SEE TABULATIONS BY CLICKING HERE.

Click Here To View/Download PDF For Small Bore SS Cylinders

Pneumatic Cylinders, Digital feedback air Cylinders, Air Cylinders, Small Bore Cylinders, Valve In Heads Cylinders, Cyl Check Cylinders, Air Clamp Cylinders, Small Bore SS Cylinders, Position Feedback Cylinders, Valves, 4 Way ¼, 3/8, & ½ NPT Valves, 2 Way, 3 Way Solenoid 1/8 & ¼ NPT Valves, 4 Way Direct Acting 1/8 NPT Valves, Time A Valve, Air Switch Valve, 1/8 NPT Poppet Valve