Small Bore Cylinders
Small Bore Cylinder Long Island
Cylinders are not throw away type. Seals can easily be replaced when required after a long trouble-free life. They have corrosion resistant brass tubing, precision honed (16 Micro or better) with cross hatch lubricant retaining pattern. Front and Rear Heads are precision machined and threaded into the tube.
Pressure Rating: 150 P.S.I. Pneumatic or Hydraulic.
Breakaway: Approximately 5-10 P.S.I.
1/2” & 3/4” BORES: Feature low friction U-Cups on the Duronze Piston, coupled with a 416 Stainless Rod. These Cylinders are available as standard in half-inch increments to 6” stroke.
1-1/8” BORE: Features an all-O-Ring construction. Aluminum Piston ground and polished 416 stainless steel rod. Cylinders are available as standard in half-inch increments to 6” and inch increments to 12” stroke.
Special strokes available in all bore sizes. Up to 14” maximum on 1-1/8” bore and 10” maximum on 1/2” & 3/4” bores.
CLICK HERE FOR ALL DIMENSIONS
STANDARD OPTIONS (FOR ALL BORE SIZES)
SPECIFY: HTP FOR HIGH TEMPERATURE SEALS
Seals are a fluorocarbon compound (viton) and have an operating temperature
range of +10°F to +350°F. They will function at temperatures up to +400°F with reduced life.
SPECIFY: DRP FOR FRONT HEAD DOUBLE ROD SEALS:
A second set of rod seals are available for heavy-duty and hydraulic applications.
SPECIFY: OS FOR OVERSIZED ROD: Larger diameter rod for column loading.
Available on 1-1/8” Bore only.
SPECIFY: SRF FOR SPRING RETURN, SPRING IN FRONT END (AIR PUSH)
SPECIFY: SRR FOR SPRING RETURN, SPRING IN REAR END (AIR PULL)
APPROXIMATE SPRING FORCES IN POUNDS
Maximum stroke available on Spring Return Cylinders is
3” on 1/2” and 3/4” Bores and 6” on 1-1/8” Bore.
ALL MOUNTS ORDERED SEPARATELY