You are now viewing:

EXTERNAL / INTERNAL CONSTRUCTION


TDH and TDP Standard cylinder construction differs depending on bore size, for instance 1-1/8” and 1-1/2” bore sizes have an aluminum threaded rear head with an aluminum snap-ring construction front head the 2” thru 4” bore have our traditional Snap-Ring construction front and rear. All bore sizes utilize stainless steel cylinder tubing with the exception of the 4” bore which uses heavy wall brass tubing.

SSTDH and SSTDP Cylinders are constructed using 300 series stainless steel.

INTERNAL CONSTRUCTION

TDP

Type “C” Cylinders are constructed using low friction “U”- Cup Seals and include a wear strip on the piston. These Cylinders are primarily used on low pressure applications and where low minimum breakaway is required.

Pressure Rating: 120 PSI. Pneumatic only.
Breakaway: Approximately 2 to 3 PSI.
Bore Sizes Available: 1-1/8”, 1-1/2”, 2”, 2-1/2”, 3” & 4”.

TDH 

Cylinders are constructed using Block-Vee Seals and include double rod seals in the front head except on the 1-1/8” Bore. A heavy-duty wear strip (bearing) on the piston minimizes friction and piston seal wear, and on side load conditions prevents metal-to-metal contact.

Pressure Rating: 200 PSI Pneumatic, 500 PSI. Hydraulic.
Breakaway: Approximately 10 to 15 PSI.
Bore Sizes Available: 1-1/8”, 1-1/2”, 2”, 2-1/2”, 3” & 4”.
5” BORE AVAILABLE-Consult Factory for Details.

Click Here To View/Download PDF For Position Feedback Cylinders

Pneumatic Cylinders, Digital feedback air Cylinders, Air Cylinders, Small Bore Cylinders, Valve In Heads Cylinders, Cyl Check Cylinders, Air Clamp Cylinders, Small Bore SS Cylinders, Position Feedback Cylinders, Valves, 4 Way ¼, 3/8, & ½ NPT Valves, 2 Way, 3 Way Solenoid 1/8 & ¼ NPT Valves, 4 Way Direct Acting 1/8 NPT Valves, Time A Valve, Air Switch Valve, 1/8 NPT Poppet Valve