DRIVE CYLINDER VALVES

SINGLE SOLENOID

MODEL SVSR / VSST 
This model incorporates a 4-way Single Solenoid Pilot Valve, air return. A maintained electrical contact is required to move the piston its full stroke. Breaking the electrical contact returns the piston to its original position. This Model is supplied with the piston normally retracted (electrical contact to extend piston)

The standard solenoid operator is the AAS splice box housing.

Voltages: 12, 24, 120 & 240/60 AC and 6, 12 & 24VDC are standard.

SINGLE SOLENOID

MODEL VERR / VSESAT
(AUTOMATIC RETURN)
This model incorporates a 4-way Single Solenoid Doubled Bleed Pilot Valve. A momentary (NOT continuous) electrical contact is required to move the piston its full stroke. Upon reaching its FULL stroke, the piston will automatically return to its original position.

This model is supplied with the piston normally retracted. (electrical contact will extend the piston)

The standard solenoid operator is the AAS splice box housing. Due to internal construction and application requirements, there can be a loss of approximately 1/8” to 1/4” of stroke.

Voltages: 12, 24, 120 & 240/60 AC and 6, 12 & 24VDC are standard.

DOUBLE SOLENOID

MODEL SDS / VDST
This model incorporates a 4-way Double Solenoid Pressure Pilot Valve. A momentary or maintained electrical contact applied to one solenoid will move the piston its full stroke. The piston will remain there under pressure until the other solenoid is energized, which will cause the piston to return to its original position. If a maintained contact is employed, the first solenoid must be de-energized before the other is energized.

The standard solenoid operator, as shown is the AAS splice box housing.

Voltages: 12, 24, 120 & 240/60 AC and 6, 12 & 24VDC are standard.