Menu
You are now viewing:



TYPES A, C & E – SINGLE ENDED
STANDARD STROKE LENGTHS: WHOLE-INCH INCREMENTS FROM 1″ THROUGH 20″ AND 1/2″, 1-1/2″, 2-1/2″ & 3-1/2″
SPECIAL STROKES AVAILABLE FROM 1/8″ TO 130″
BASIC CONSTRUCTION (DOUBLE ACTING)
TYPE A SINGLE ENDED : All Type “A” Cylinders, with the exception of the 4”
bore, are constructed using “O”- Ring Seals. The 4” bore uses “O”- Ring Rod
Seals and “U”- Cup Piston seals. These all-purpose units are used for most
pneumatic applications. Optional Double Rod Packings are recommended for
heavy-duty and hydraulic applications, not
available on 7/8” & 1-1/8″ Bores.
Pressure Rating: 150 P.S.I. Pneumatic, 350 P.S.I. Hydraulic.
Breakaway: Approximately 5 to 8 P.S.I.
Bore Sizes Available:
7/8”, 1-1/8”, 1-1/2”, 2”, 2-1/2” ,3” & 4″ .

TYPE C SINGLE ENDED : Type “C” Cylinders are constructed using
low friction “U” Cup Seals and include a wear strip on the piston with
the exception of the 4″ bore (it has no wear strip). These Cylinders are
primarily used on low pressure applications and where low minimum
breakaway is required.
Pressure Rating: 150 P.S.I. Pneumatic only.
Breakaway: Approximately 2 to 3 P.S.I.
Bore Sizes Available:
7/8”, 1-1/8”, 1-1/2”, 2”, 2-1/2” & 3″ .

TYPE E SINGLE ENDED : Type “E” Cylinders are constructed using
Block-Vee Seals and include double rod seals in the front head except
on the 7/8” & 1-1/8” Bores. A heavy-duty wear strip (bearing) on the
piston minimizes friction and piston seal wear, and side load conditions
prevents metal-to-metal contact. These Cylinders are generally used
on low pressure hydraulics and where side load conditions are
present.
Pressure Rating: 200 P.S.I. Pneumatic, 500 P.S.I. Hydraulic.
Breakaway: Approximately 10 to 15 P.S.I.
Bore Sizes Available:
7/8”, 1-1/8”, 1-1/2”, 2”, 2-1/2”, 3”, 4” & 5*.
*5” BORE AVAILABLE-Consult Factory for Details.
