You are now viewing:

STANDARD FEATURES


1) TUBE: 300 SERIES STAINLESS STEEL TUBING PRECISION HONED “I.D.”
     (16 MICRO OR BETTER) FOR SIZE AND ROUNDNESS WITH CROSS HATCH LUBRICANT
     RETAINING PATTERN. POLISHED “O.D.” TO A 32 MICRO OR BETTER FOR EASE OF CLEANING.

2) FRONT HEAD: 300 SERIES STAINLESS STEEL IS IDEAL FOR WASHDOWN APPLICATIONS. DESIGNED
    SPECIFICALLY TO REDUCE POINTS OF CONTAMINATION.

3) REAR HEAD: 300 SERIES STAINLESS STEEL IS IDEAL FOR WASH-DOWN APPLICATIONS. DESIGNED
    SPECIFICALLY TO REDUCE POINTS OF CONTAMINATION.

4) PISTON ROD: GROUND AND POLISHED 303 OR 316 STAINLESS STEEL FOR MAXIMUM CORROSION
    RESISTANCE.

5) PISTON: PRECISION MACHINED FROM 303 STAINLESS STEEL FOR INTERNAL CORROSION RESISTANCE, THEY
     ARE ASSEMBLED WITH “BLOCK-VEE” OR “U” CUP SEALS. A HEAVY-DUTY WEAR STRIP (BEARING) ON THE
     PISTON MINIMIZES FRICTION AND SEAL WEAR, AND ON SIDE LOAD CONDITIONS PREVENTS
     METAL-TO-METAL CONTACT.

6) PIVOT BUSHING: LONG LIFE REPLACEABLE PIVOT BUSHING

7) HEAD SEALS: NITRILE MATERIAL IS STANDARD. HIGH TEMPERATURE AND OTHER MATERIALS ARE
     AVAILABLE.

8) ROD BEARING: SNAP-IN BEARING CONSTRUCTION MATERIAL IS NYLON FOR EXTREMELY LOW FRICTION
     AND EXTENDED LIFE.

9) LEATHER BACK-UP RING: AIDS IN KEEPING ROD CLEAN “WR” TEFLON WIPER RING ALSO AVAILABLE.

10) NITRILE ROD SEAL: NITRILE MATERIAL IS STANDARD. HIGH TEMPERATURE AND OTHER MATERIALS ARE
      AVAILABLE.

11) PISTON SEALS: “BLOCK-VEE” OR “U CUP ARE PRESSURE ACTIVATED AND WEAR COMPENSATING. NITRILE
      MATERIAL IS STANDARD. HIGH TEMPERATURE AND OTHER MATERIALS ARE AVAILABLE.

12) WEAR STRIP (BEARING): MINIMIZES FRICTION AND SEAL WEAR. AND ON SIDE LOAD CONDITIONS
      PREVENTS METAL-TO-METAL CONTACT.

13) 8mm 3 PIN MALE CONNECTOR FOR USE WITH STANDARD CORDSETS. DEGREE OF PROTECTION (IP67).

14) REPLACEABLE TRANSDUCER PROBE AND WIPER BLOCK ASS’Y.

Click Here To View/Download PDF For Position Feedback Cylinders

Pneumatic Cylinders, Digital feedback air Cylinders, Air Cylinders, Small Bore Cylinders, Valve In Heads Cylinders, Cyl Check Cylinders, Air Clamp Cylinders, Small Bore SS Cylinders, Position Feedback Cylinders, Valves, 4 Way ¼, 3/8, & ½ NPT Valves, 2 Way, 3 Way Solenoid 1/8 & ¼ NPT Valves, 4 Way Direct Acting 1/8 NPT Valves, Time A Valve, Air Switch Valve, 1/8 NPT Poppet Valve